Driveway Resurfacing in Springfield, Oregon: Cost & Process

What Is Driveway Resurfacing — and Is It Right for Your Springfield Driveway?

Resurfacing, also called an overlay, lays a fresh layer of asphalt — usually 1.5 to 2 inches — over your existing driveway. It restores a smooth, dark surface and adds years of life at a fraction of the cost of full replacement. The condition for it to work: the base and the existing pavement underneath must be structurally sound.

In Springfield, the wet Lane County climate makes that condition worth checking. Months of saturated ground can soften a base from below, so a driveway that looks worn on top may have a foundation problem underneath. When the base is good, an overlay is the smart, economical fix; when it's failing, the new layer just cracks the same way. Our guide to driveway resurfacing vs. replacement lays out how to tell.

What Driveway Resurfacing Costs in Springfield

Industry baseline ranges shown below. Actual costs vary based on driveway size, prep needed, overlay thickness, and current market conditions.

Driveway Size	Approx. Square Feet	Industry Baseline Range
1-car	400–600 sq ft	$1,500–$3,500
2-car	600–900 sq ft	$2,500–$5,500
3-car / extended	900–1,400 sq ft	$4,000–$8,000+

Resurfacing typically runs 40 to 60 percent less than full replacement because there's no demolition or base rebuild — the existing driveway becomes the foundation for the new layer. Costs rise if the surface needs significant crack repair or leveling first.

These are reference ranges from national contractor data. Your actual cost depends on prep work, overlay thickness, and access.

The Resurfacing Process in Springfield

1. Inspection — The contractor confirms the base is sound and the existing asphalt can support an overlay. In Springfield, this is where wet-season base softening gets caught.
2. Cleaning — The surface is cleared of debris, dirt, moss, and vegetation so the new layer bonds properly. The damp climate makes moss common on shaded driveways.
3. Crack and pothole repair — Significant cracks are filled and low spots leveled. Skipping this lets old cracks reflect through.
4. Tack coat — A bonding agent is applied so the new asphalt adheres to the old surface.
5. Overlay — A fresh layer of hot-mix asphalt is laid and rolled to compaction.
6. Curing — The surface needs time to harden before heavy use and sealcoating.

When Resurfacing Works in Springfield — and When It Doesn't

Good candidates for resurfacing

• Surface cracking and wear without structural damage
• A base that's still firm and well-drained
• Driveways under about 15 to 20 years old with a sound foundation
• Cosmetic damage and minor unevenness

When replacement is the better call

• Widespread alligator cracking across more than a quarter of the surface
• Sunken or heaved sections pointing to base failure
• Drainage problems keeping water under the slab
• A base softened by years of saturation

If your driveway fits the second list, see our driveway replacement in Springfield guide.

Why Springfield's Conditions Matter for Resurfacing

Wet-season softening can hide under a good surface

A driveway can look intact while water has been working into the base through the rainy months. Resurfacing over a softened base wastes money. A contractor who knows the Lane County climate will check for this before recommending an overlay.

Drainage

If poor drainage let water sit under the driveway and contribute to the wear, that needs correcting before any overlay — otherwise the new layer faces the same moisture.

Moss and surface prep

Springfield's damp climate encourages moss on shaded driveways. Thorough cleaning before the overlay is essential for the new asphalt to bond properly.

What a Contractor Can't See Until Work Begins

Even careful inspection can't reveal everything. Common surprises in Springfield resurfacing jobs include:

• Base softening under intact-looking pavement — Saturation damage without obvious surface signs
• Cracks deeper than they appear — Surface cracks running into the base
• Drainage issues — Water patterns that contributed to wear and will affect the overlay
• Old patches that won't bond — Previous repairs needing removal before overlay

These unknowns are why a site assessment beats any price chart. A contractor who evaluates your base gives a far more accurate recommendation.

Making the Resurfacing Decision

Resurfacing is the economical choice when your Springfield driveway's foundation is solid and only the surface is worn. When the wet climate has softened the base, replacement is the honest answer. For pricing context, see our asphalt driveway cost in Springfield page and the complete asphalt driveway guide for Oregon. Building fresh instead? Our new driveway installation in Springfield guide covers that.