Parking Lot
Car Dealership Parking Lot Striping in Boardman, Oregon: 2026 Service Guide
Cojo
May 30, 2026
7 min read
A car dealership is the most striping-intensive commercial property a contractor handles. One site has to serve display inventory, customer parking, a service drive, employee parking, and transporter deliveries, and each function needs its own clearly defined zone. Boardman's auto lots sit along Main Street and near the I-84 interchange in Morrow County, on the Columbia River corridor. The Port of Morrow's industrial workforce, the data-center buildout, and the surrounding irrigated farmland drive strong demand for trucks and work vehicles, and the freeway frontage gives a lot good exposure to corridor traffic.
Boardman's industrial-and-agricultural economy gives its auto trade a heavy workhorse character. Pickups, fleet rigs, and ag-hauling vehicles dominate the demand here, and the lots reflect it. That inventory mix, plus the value the I-84 frontage places on visible display, drives how the striping gets laid out.
The first job on any dealership lot is dividing the pavement into purpose zones. Display rows hold front-line inventory and are striped tight for maximum street visibility, which is especially valuable along the I-84 frontage. Customer parking sits near the showroom with standard-width stalls. The service drive is a separate flow with pull-through lanes feeding the bays.
These zones need visual separation, not just paint. We use directional arrows, lane lines, and curb markings to keep customers out of packed display rows and service-bound vehicles out of customer parking. On a Boardman lot drawing local, port, and pass-through traffic, clear segmentation keeps the flow orderly.
Display capacity is revenue, so dealerships want maximum vehicles on the front line. Angled striping at 45 or 60 degrees packs vehicles closer while still letting them pull in and out without a full turn. The trade-off is aisle consumption, so the geometry balances density against maneuverability.
We lay out angled display rows around the dealership's actual inventory mix. Boardman's truck-and-fleet-heavy demand means wider stalls and more maneuvering room than a compact-focused lot, so the angle and dimensions are set to carry that inventory while still maximizing what shows along the frontage.
Car carriers delivering new inventory are large and need a dedicated unload zone that does not block the street or customer entrance. We stripe a transporter staging lane, ideally toward the back or side, with keep-clear markings so it stays open during deliveries. On the I-84 corridor, keeping carriers off the busy access roads during unload is a real concern.
Test-drive returns benefit from defined routing. A marked return lane with directional arrows keeps returning vehicles out of display rows, which matters at a dealership where test drives often involve full-size trucks. Routing built around continuous all-day vehicle movement keeps the lot from tangling.
The showroom is a public building, so the dealership carries full ADA obligations at its customer entrance. That means compliant accessible stalls near the showroom door, striped access aisles, and an unobstructed path of travel into the building. Boardman dealerships follow Oregon's parking lot striping regulations on top of federal ADA standards.
We place the accessible stalls in the customer parking zone, mark the access aisles, install the access symbols and signage, and confirm the path of travel does not cross the service drive or a display row without a marked crossing. Dealerships often overlook this because so much of the lot is inventory, but the customer area is held to the same standard as any retail store.
Oregon dealer licensing comes with site requirements, including frontage and display standards that intersect with lot layout. A compliant Boardman dealership balances maximum inventory display against access, customer parking, and ADA obligations. Striping is the practical tool that reconciles those competing demands on one piece of pavement.
Dealership striping follows standard industry baselines but is among the most layout-intensive commercial work. As a reference, industry sources have historically reported per-space restriping baselines around $3 to $6 per space, with full-lot and new-layout work baselined higher. Actual Boardman-market costs frequently exceed published figures, both for dealership complexity and the travel to this corner of north-central Oregon. The variables that move your number include:
For the full breakdown, see our parking lot striping cost in Oregon guide and our parking lot striping in Boardman overview.
Understand what happens during an ADA parking compliance audit, common violations found in Oregon commercial lots, and how to prepare your property.
Complete guide to ADA parking requirements in Oregon, including space dimensions, van accessible standards, signage rules, and ORS 447.233 specifics for commercial property owners.
See real before-and-after results of commercial sealcoating projects in Oregon and learn how this affordable maintenance extends parking lot life by a decade or more.
Have a question about this topic? We'll respond within 24 hours.