A true 12-foot rubber speed hump (the length that actually qualifies as a hump per ITE standards) runs $1,200 to $2,800 per unit uninstalled and $2,000 to $4,500 installed in 2026. The bigger pricing trap: most product sold under the "rubber speed hump" label is actually a rubber speed bump (4 to 6 ft long), priced $80 to $400 per unit. Before you buy anything labeled "speed hump," confirm it's at least 12 feet long. Below: true rubber speed hump pricing only — the bump-priced-as-hump category gets covered separately.
Industry Baseline Range
| Component | Single Unit | Multi-Unit (3+) |
|---|---|---|
| Rubber sections (12 ft modular) | $1,200 to $2,800 | $900 to $2,200 |
| Anchor hardware | $80 to $200 | $60 to $150 |
| Labor (install + traffic control) | $600 to $1,400 | $400 to $1,000 |
| Pavement marking + signage | $200 to $600 | $150 to $450 |
| Installed total per unit | $2,000 to $4,500 | $1,500 to $3,500 |
Current market reality
Rubber product prices in 2026 reflect roughly 15% increases over 2024 baselines, driven by polymer-feedstock cost increases (the recycled-tire crumb-rubber market faced supply constraints in late 2025) and shipping pressures on manufacturers. Most rubber humps ship from a small number of U.S. molders, and lead times stretched from 2 weeks to 6 to 8 weeks for premium configurations during 2025. Lead times have begun to normalize but supply is not yet at 2023 levels.
What does the per-unit price include?
A 12-foot modular rubber speed hump kit typically includes:
- 4 to 7 rubber sections (each roughly 2 to 3 ft long) that bolt together end-to-end
- Internal connectors or interlocking edges
- Reflective tape strips applied to the leading face
- Concrete-anchor or surface-anchor hardware (kit dependent)
- Manufacturer installation instructions
Premium configurations include:
- Embedded reflective road studs (cat's-eye reflectors)
- Heavier section weight ratings (60,000 lb GVWR)
- Sinusoidal-style profile (gentler for cyclists)
- UV-resistant compound for high-sun applications
Confirm what the per-unit price covers before comparing quotes. A "low" per-unit price that excludes anchor hardware adds $80 to $200 in field-procured fasteners.
What does the install labor cost?
Rubber hump installs run faster than asphalt because no hot-mix, screeding, or roller is required. A typical 12-foot rubber install:
- Layout and mark anchor pattern: 30 to 45 minutes
- Drill anchor holes (concrete anchors): 30 to 60 minutes
- Set sections, bolt connections, torque to spec: 45 to 90 minutes
- Pavement marking and signage: 60 to 90 minutes
- Traffic-control setup and breakdown: 60 to 90 minutes
Total: 3.5 to 6.5 hours with a 2-person crew. Labor cost runs $600 to $1,400 in 2026, roughly 30 to 50% lower than asphalt-hump labor.
What is the lifecycle cost?
Rubber humps last 5 to 8 years; asphalt humps last 15 to 25 years. The lifecycle math:
| Material | Installed Cost | Lifespan | Annualized Cost |
|---|---|---|---|
| Rubber (12 ft modular) | $2,000 to $4,500 | 5 to 8 years | $250 to $900/year |
| Asphalt (12 ft Watts) | $1,500 to $4,500 | 15 to 25 years | $80 to $330/year |
Rubber's annualized cost is 2 to 4 times asphalt's. The breakeven favors asphalt for any install intended to remain in place 10+ years. Rubber wins when the install is genuinely temporary (pilot programs, seasonal removal in snow-belt cities, traffic-phasing applications).
In a 2024 install for the City of Bend, our crew specified rubber humps for a residential street that requires winter snow plowing. The seasonal removability justified the higher annualized cost; a permanent asphalt hump would have been damaged by plow blades.
What about anchor hardware cost?
Concrete-anchor hardware for a 12-foot modular rubber hump runs $80 to $200 per unit. The hardware spec varies by manufacturer:
- 4 to 6 anchor bolts per section, totaling 16 to 42 bolts per 12-foot hump
- Bolt size typically 3/8" x 4" with shielded sleeve anchors for asphalt or wedge anchors for concrete
- Torque spec usually 25 to 35 lb-ft, manufacturer-confirmed
Surface-anchor systems (used for removable seasonal installs) cost more per unit ($150 to $400) because the surface-mount plates require additional engineering to keep the hump anchored without permanently damaging the underlying pavement.
How does shipping affect the price?
Rubber humps ship from a small number of U.S. molders and freight runs $300 to $900 per shipment depending on origin. For Oregon installs, most product ships from California, Tennessee, or Pennsylvania manufacturers. Lead times in 2026 average 4 to 6 weeks; premium configurations and high-demand periods (spring construction) can extend to 8+ weeks.
Multi-unit orders consolidate freight; a 4-hump order typically pays one freight charge versus four. For projects with tight schedules, contractor stocking inventory matters more than per-unit price.
Frequently asked questions
How much does a rubber speed hump cost in 2026? True 12-foot rubber speed humps run $1,200 to $2,800 per unit uninstalled and $2,000 to $4,500 installed. Most rubber product labeled "speed hump" is actually a 4 to 6 ft speed bump and prices are far lower; verify the length.
Why are rubber speed humps more expensive than asphalt? On install cost, they overlap. On lifecycle cost (annualized over the device lifespan), rubber is 2 to 4 times more expensive because the device replaces every 5 to 8 years versus 15 to 25 for asphalt.
Can rubber speed hump material be reused after removal? Sometimes. Modular sections that come up cleanly can be reused if the rubber compound has not degraded and the bolt holes have not deformed. Annual reuse rate is roughly 60 to 80%.
Does the price include reflective markings? Most kits include reflective tape strips applied to the leading face. Embedded road studs (cat's-eye reflectors) are typically a premium upgrade.
Is there cost-share funding for rubber speed humps? Pilot programs sometimes use city funds for rubber. Permanent program installs default to asphalt; cost-share programs in Portland, Beaverton, and Eugene generally require asphalt for permanent install eligibility.
Get a Rubber Speed Hump Quote
Cojo specs and installs rubber speed humps across Oregon with sourcing relationships across major U.S. molders. Contact Cojo for current pricing and lead times, or see our speed humps guide for full device options.