ADA curb ramp installation in Salem, Oregon answers to three layered authorities at once: the federal ADA Accessibility Guidelines (ADAAG) for slope, width, and detectable warnings, the Salem ADA Transition Plan for the multi-year priority sequencing of right-of-way upgrades, and Salem Public Works Construction Specifications for mix and surface tolerances. A ramp that misses any one of the three fails inspection and reopens the property to ADA complaint risk.
What follows is the field version of how our crews scope, pour, and inspect ADA curb ramps in Salem — including how the city's downtown retrofit campaign reaches into private redevelopment.
What is an ADA-compliant curb ramp in Salem?
Direct answer: An ADA-compliant curb ramp in Salem must meet a 1:12 maximum running slope, 1:48 maximum cross slope, 36-inch minimum clear width, 48-inch minimum top landing, and a detectable warning surface (truncated domes) at the base. Concrete is poured in Class 4000 mix per ODOT 00759 and Salem Public Works specs. Cojo crews install precast or cast-in-place ramps with surface-applied or cast-in-place truncated dome panels meeting ADAAG 4.7.
What does ADAAG 4.7 require?
The federal ADA Accessibility Guidelines section 4.7 sets the dimensional rules. The numbers Cojo's Salem crews build to:
| Dimension | ADAAG 4.7 Requirement |
|---|---|
| Maximum running slope | 1:12 (8.33%) |
| Maximum cross slope | 1:48 (2.08%) |
| Minimum ramp width | 36 inches clear |
| Top landing length | 48 inches minimum |
| Top landing slope | 1:48 maximum in any direction |
| Flare slope (if used) | 1:10 maximum |
| Counter slope at gutter | 1:20 maximum |
| Detectable warning depth | 24 inches minimum |
| Detectable warning width | Full width of the ramp |
What truncated dome panels does Salem accept?
Two installation methods qualify:
Cast-in-place truncated domes
Wet-set tile panels (typically 24 inches by 24 inches or 24 by 36) get pressed into fresh concrete during the ramp pour. The panel becomes mechanically integral with the slab. Lifespan in Salem's freeze-thaw climate runs 15 to 25 years. Cojo's preferred method on new pours.
Surface-applied truncated domes
Mechanically anchored panels installed on top of an existing concrete ramp surface. Used for retrofits where the ramp slope is already compliant but the detectable warning is missing or non-compliant. Lifespan runs 5 to 10 years and the panels need replacement when bolts pull loose or the dome pattern wears smooth.
We default to cast-in-place on every new pour. Surface-applied is the retrofit-only option.
How does Salem's ADA Transition Plan affect private projects?
Salem has been working through a multi-year ADA Transition Plan to bring every public-right-of-way corner ramp up to current standards. Three implications for private property owners:
- Triggered upgrades. When a private redevelopment touches a right-of-way corner ramp -- a new driveway apron, a sidewalk corner replacement, a curb cut -- Salem typically requires the adjacent corner ramp to be upgraded to current standards as part of the project. This is often the first surprise on an older parking-lot retrofit.
- Coordination with the Salem program. If the adjacent corner is already on Salem's Transition Plan schedule for replacement, we coordinate timing so the property does not pay twice.
- Documentation. Salem Public Works inspector signs off on right-of-way ramps; Multnomah-style ADA compliance audit (private side) needs separate documentation. Both end up in the property file.
A Cojo Salem install reference
In April 2026, Cojo crews installed eight new ADA curb ramps along State Street in downtown Salem as part of the city's Transition Plan rollout coordinated with a private retail facade renovation. The work scope: demo and remove eight 1980s ramps that failed slope and detectable-warning checks, pour eight new cast-in-place ramps with 24-by-36-inch wet-set truncated dome panels, and tie each ramp into existing sidewalk and curb-and-gutter sections without disturbing the building's storefront frontage. Salem Public Works inspector signed off on day 14. The retrofit increased the property's compliance score on its triennial ADA assessment by enough to close two pending right-of-way complaint letters.
How much does ADA curb ramp installation cost in Salem?
Industry Baseline Range
| Component | Price (Installed) |
|---|---|
| New cast-in-place ramp with cast-in-place truncated domes | $1,400 to $3,500+ |
| Surface-applied truncated dome panels (retrofit existing ramp) | $300 to $700 per panel |
| Demolition of non-compliant ramp | $400 to $900 |
| Re-grade of approach to meet 1:12 slope | $500 to $1,800 |
| Sidewalk tie-in (per 10 lf) | $80 to $160 |
Current Market Reality
Truncated dome panel prices climbed sharply in 2023 to 2024 because of supply-chain pressure on the porcelain and composite panel industry. Cast-in-place tile pricing has stabilized in 2026. Demo cost on a Salem ramp varies wildly because some 1990s ramps were poured directly against the back-of-curb without expansion joints -- those require careful saw-cutting to avoid damaging the adjacent curb. Get a written quote with the demo cost broken out separately.
What ramp type fits which Salem use case?
| Use Case | Recommended Ramp Type |
|---|---|
| New build, public right-of-way corner | Cast-in-place perpendicular ramp with cast-in-place truncated domes |
| New build, private parking lot crossing | Cast-in-place ramp, parallel-to-curb orientation, cast-in-place domes |
| Retrofit -- ramp slope compliant, detectable warning missing | Surface-applied truncated dome panels |
| Retrofit -- ramp slope non-compliant | Full demo and replace |
| Tight building setback (no room for 1:12 ramp) | Combination ramp with flares -- may need site re-grading |
What about other Cojo Salem ADA work?
Curb ramps are one element of a property's ADA parking compliance. The full picture includes accessible parking space dimensions, access aisle striping, signage, and accessible-route grading from the parking stall to the building entrance. See ADA parking requirements Oregon for the full Oregon enforcement framework under both federal ADA and ORS 447.233.
What neighborhoods does Cojo cover for ADA ramp work in Salem?
Cojo's Salem ADA crews regularly work in:
- Downtown Salem and the Capitol Mall area
- South Salem (Sunnyslope, Morningside, Faye Wright)
- North Salem (Northgate, Hayesville)
- West Salem (Eola, Grice Hill)
- Southeast Salem (Battle Creek)
- Keizer (River Road, Inland Shores)
How do we sequence ADA ramp work around an active business?
Most retail and medical clients cannot close the lot or storefront. We sequence one ramp at a time with barricades and pedestrian detour signage. Typical timeline: demo and re-pour one ramp in 3 days plus 7-day cure under barricade. A four-ramp project finishes in 4 to 5 weeks with the property staying fully operational throughout.
Ready to scope ADA curb ramp work in Salem?
We handle ADAAG-compliant curb ramp installation, retrofit, and detectable-warning panel work across Salem, Keizer, and Marion and Polk Counties. We pull Salem Public Works permits in the right-of-way and coordinate with property-side ADA compliance audits. Contact Cojo for a site walk and a written scope.