Bollard Installation in Beaverton, Oregon
Beaverton bollard demand is heavy and concentrated. Three corridors drive the calls: the Cedar Hills Crossing and Beaverton Town Square retail strips, the Highway 217 office and tech corridor, and the Murray Boulevard EV charging build-out. Cojo serves all of Beaverton from the I-5 corridor base. This page lays out what installation looks like in the city, what local code requires, and what to expect on price and lead time.
Quick Answer: What Does Beaverton Bollard Installation Look Like?
A standard 6-inch concrete-filled steel pipe bollard installed in Beaverton takes 4 to 6 hours per unit, requires a 24 to 36 inch concrete footing, and runs $400 to $1,200 installed. The City of Beaverton enforces site-improvement standards through the Beaverton Development Code, ADA scoping through the Building Codes Division, and right-of-way work through the Public Works Operations Center. Most Beaverton sites sit on Willamette silty clay, with pockets of fill near Beaverton Creek and Fanno Creek requiring deeper footings.
Why Are Bollards Specified in Beaverton?
- Heavy retail traffic. The Cedar Hills Crossing and Beaverton Town Square corridors handle high vehicle volumes adjacent to storefronts and outdoor seating. CISA's vehicle ramming guidance documents the storefront-strike risk profile (CISA Vehicle Ramming Mitigation).
- EV charging build-out. Beaverton has aggressive EV charger deployment under Oregon's Climate Protection Program. Each Level 3 cabinet needs vehicle-strike protection -- typically two 6-inch pipe bollards per unit (NACS connector standard reference, U.S. DOE Joint Office).
- ADA enforcement. ADA Section 403.5 requires a 36-inch minimum clear path width on accessible routes (ADA Standards). Beaverton's mixed-use plazas have routinely failed initial ADA reviews until path widths are corrected.
Which Beaverton Codes Apply to Bollard Work?
The City of Beaverton has adopted the Oregon Structural Specialty Code (which incorporates the IBC and the federal ADA Standards) and enforces site improvements through the Beaverton Development Code (BDC) Chapters 60 and 70. Right-of-way work along Cedar Hills Boulevard, Murray Boulevard, and the ODOT-jurisdiction sections of Highway 217 requires ODOT design conformance (ODOT Design Manual). For Highway 217 project work, ODOT also enforces clear-zone setbacks beyond city standards.
What Soil Conditions Show Up at Beaverton Sites?
Most Beaverton sites sit on Willamette silty clay loam with pockets of engineered fill near the Beaverton Creek and Fanno Creek drainages. Two notes:
- Fill at older sites. Plazas built in the 1970s and 1980s along Hall Boulevard often have 12 to 24 inches of fill over the original grade. We core-test on site and extend embedment depth into native soil when fill is encountered.
- Drainage at low spots. Sites near the creeks have a seasonally high water table. Footings below the seasonal water elevation need a sleeve detail or wet-placement concrete mix.
Freeze-thaw cycles run 25 to 35 per Beaverton winter -- enough that air-entrained concrete is mandatory in our spec.
What Did Cojo's Last Beaverton Install Look Like?
In January 2026 we installed 4 stainless steel decorative bollards (304 alloy, 6-inch outer diameter, 36 inches above grade) at a 14,000 square foot Beaverton retail center near Cedar Hills Boulevard. The owner specified stainless for facade aesthetic match. Footings ran 36 inches with grade-rated anchor cages. Each bollard was hand-finished and field-welded into final position. Field time: 1.5 days, 2-person crew. The same job included 2 vehicle-strike protection bollards at a paired Level 3 EV charging cabinet -- see our EV charging bollards reference for the EV-specific spec rationale.
How Much Does Bollard Installation Cost in Beaverton?
Industry Baseline Range
| Bollard Type | Installed Price (each) |
|---|---|
| 4-inch steel pipe, surface-mount | $300 to $700 |
| 6-inch concrete-filled steel pipe, embedded | $400 to $1,200 |
| Stainless steel decorative | $1,200 to $2,800 |
| Removable bollard with sleeve | $700 to $1,800 |
| EV charging protection (pair, installed) | $900 to $2,400 |
| ASTM F2656 K4 crash-rated | $1,500 to $4,000 |
| ASTM F2656 K12 crash-rated | $4,500 to $10,000 |
Current Market Reality
Beaverton 2026 pricing runs above the regional baseline because Cedar Hills and Highway 217 corridor jobs require traffic-control plans, after-hours scheduling at most retail centers, and tighter ADA enforcement during plan review. Stainless and decorative work has run high through 2026 because Asian-supply lead times stretched on 304 and 316 stock. Lead time on stock steel: 2 to 3 weeks. Stainless: 4 to 6 weeks. Crash-rated certified: 6 to 10 weeks.
What Does the Installation Process Look Like?
- Site walk. Stall geometry, ADA path of travel, slab thickness, and (for retail) traffic-control needs.
- Utility locate. Oregon 811 ticket at least 2 business days before excavation (Oregon 811).
- Layout and core-drill or excavate. ADA-compliant 36-inch minimum spacing maintained between adjacent posts on accessible routes.
- Set, plumb, pour. Concrete-filled steel pipe set, plumbed within 1/8 inch, poured monolithic to grade.
- Cure and finish. 7 day minimum impact wait, 28 day full strength. Photo log and concrete mix slip delivered to owner.
For full pricing breakdowns and product comparisons, see our storefront bollards and best security bollards references.
Which Beaverton Areas Does Cojo Serve?
- Cedar Hills (Cedar Hills Crossing, Sunset Valley)
- Central Beaverton (Beaverton Town Square, Old Town)
- South Beaverton (Murray-Scholls, Progress Ridge, Cooper Mountain)
- North Beaverton (Cedar Mill, Bonny Slope)
- West Beaverton (Aloha)
- Bethany (just north of Beaverton -- coordinated with Washington County)
How Does This Pair with Striping?
Beaverton bollard installs frequently come bundled with re-striping work. New stall geometry typically follows a bollard install at the storefront edge. See commercial striping in Beaverton for that scope, and the Portland metro bollards page if you operate multiple Portland-area sites.
Get a Beaverton Bollard Quote
Cojo handles bollard installation across Beaverton, Aloha, Bethany, and the Highway 217 corridor. Every quote comes with a written ADA compliance review. Contact Cojo for a site walk; Beaverton-area bollard work usually pairs with the rest of our parking lot services on the same crew day.