What Does Parking Lot Striping Cost in Bend?
Bend's rapid growth has produced a wave of new commercial construction along the US-97 corridor and Century Drive, creating demand for both new-layout striping and restriping of established lots. Deschutes County's tourism economy means parking lots at hotels, breweries, and outdoor recreation businesses see heavy seasonal wear.
Industry sources have historically reported baseline costs of $3.50–$7 per parking space for standard restriping in the Bend area. A full lot restripe for a 100-space commercial lot has historically been reported between $650 and $1,100, while new layout striping — which includes measuring, planning, and painting a lot for the first time or completely redesigning an existing layout — has been reported at $1,000 to $1,700 for the same size lot. However, actual project costs frequently exceed these baselines depending on surface condition, paint type, ADA requirements, lot complexity, and current market conditions.
Whether you manage a retail center, office building, church, or apartment complex in Deschutes County, understanding the cost breakdown helps you budget accurately and compare contractor quotes with confidence.
Bend Parking Lot Striping Prices: Industry Baseline Ranges
The tables below reflect industry baseline ranges that have been historically reported for standard striping projects. Your actual cost may be significantly higher — in many cases 2 to 3 times these figures — depending on surface condition, paint type, layout complexity, ADA requirements, and current labor and material costs. These ranges assume ideal conditions: clean asphalt in good repair, standard water-based paint, simple rectangular layouts, and no ADA redesign work.
Per-Space Restriping (Industry Baseline)
| Lot Size | Spaces | Industry Baseline Range | Per Space |
|---|---|---|---|
| Small lot | 20–50 spaces | $400–$700 | $3.50–$7.00 |
| Medium lot | 50–100 spaces | $650–$1,100 | $3.25–$6.50 |
| Large lot | 100–200 spaces | $1,100–$2,000 | $3.00–$6.00 |
Per-space pricing decreases as lot size increases because mobilization and setup costs are spread across more spaces.
Per-Linear-Foot Pricing (Industry Baseline)
| Line Type | Industry Baseline per LF |
|---|---|
| Standard 4-inch parking lines | $0.25–$0.55 |
| Curb painting (red/yellow/white) | $0.35–$0.70 |
| Directional arrows (each) | $25–$50 |
| Stencils (RESERVED, NO PARKING, etc.) | $30–$75 each |
Linear-foot pricing is commonly used for drive aisles, fire lanes, and roadway markings rather than individual parking spaces.
New Layout Striping (Industry Baseline — First-Time or Full Redesign)
| Lot Size | Spaces | Industry Baseline Range |
|---|---|---|
| Small lot | 20–50 spaces | $600–$1,000 |
| Medium lot | 50–100 spaces | $1,000–$1,700 |
| Large lot | 100–200 spaces | $1,700–$3,000 |
New layout striping costs 40 to 60 percent more than restriping because it includes lot measurement, space planning, ADA layout compliance, and precise chalk-line layout before any paint is applied.
ADA-Compliant Spaces and Fire Lanes (Industry Baseline)
| Service | Industry Baseline Range |
|---|---|
| ADA-compliant space (complete) | $225–$400 per space |
| ADA access aisle marking | $75–$150 each |
| ADA signage (post + sign) | $150–$250 each |
| Fire lane striping (per linear foot) | $2.25–$4.50 |
| Fire lane curb painting | $2.75–$5.25 per LF |
ADA spaces cost more because they require specific dimensions (van-accessible at 8 feet wide with an 8-foot access aisle, or standard at 8 feet with a 5-foot aisle), blue paint, the International Symbol of Accessibility stencil, and proper signage. Oregon requires specific parking lot striping regulations that all Bend properties must follow.
Current Market Reality: Why Your Quote May Be Higher
The industry baseline ranges above represent historical averages under ideal conditions. In practice, most Bend striping projects involve one or more factors that push actual costs well above those baselines — often 2 to 3 times the low-end figures. Here is why:
- Surface prep is rarely zero — Most lots need at least some cleaning, crack treatment, or oil spot treatment before paint will adhere properly. Lots that have not been maintained regularly may require extensive prep.
- Premium paint types are increasingly common — Thermoplastic and high-durability paints cost significantly more than basic water-based latex but last 2 to 5 times longer, making them the better long-term investment for many property managers.
- ADA compliance adds substantial cost — Each ADA-compliant space requires specialized dimensions, stenciling, and signage that cost significantly more than a standard parking space.
- Complex layouts multiply labor hours — Angled spaces, curved drive aisles, multi-level parking, and custom stenciling all increase the time and skill required.
- Market conditions fluctuate — Labor rates, material costs, fuel surcharges, and seasonal demand all affect what contractors charge at any given time.
- Small lots pay a premium per space — A 15-space lot has the same mobilization cost as a 150-space lot, which significantly raises the per-space rate for smaller projects.
The only reliable way to know your actual cost is to get a site-specific quote from a qualified contractor who has walked your lot.
Factors That Affect Striping Cost in Bend
Lot Condition and Surface Prep
Asphalt in good condition accepts paint immediately. Lots with cracks, oil stains, potholes, or deteriorated surfaces need cleaning and repair before striping can begin. Surface prep costs vary widely depending on severity. Pairing striping with sealcoating? See our sealcoating and striping package for bundled pricing.
Paint Type and Durability
- Water-based latex traffic paint — Most common, lowest cost, lasts 12 to 24 months in Bend conditions
- Oil-based traffic paint — Better adhesion, moderately more expensive, lasts 18 to 30 months
- Thermoplastic — Premium option, significantly higher cost than latex, lasts 3 to 5 years with heavy traffic
- Reflective glass beads — Added to any paint type for improved nighttime visibility
Number of Spaces and Lot Complexity
Bend's high-desert climate brings intense UV exposure that fades paint faster than in western Oregon. Winter freeze-thaw cycles also chip away at surface markings. Most Bend contractors recommend restriping every 18 to 24 months rather than the 24 to 36 months common in the Willamette Valley.
Simple rectangular lots with standard 90-degree spaces are the most cost-effective to stripe. Angled spaces, curved drive aisles, multi-level parking, and lots with numerous directional arrows and stencils increase labor time and cost.
Timing and Scheduling
Striping season in Bend runs from late spring through early fall when temperatures stay above 50°F and rain probability is low. Summer bookings fill quickly — scheduling in spring for early summer work often secures better availability and pricing.
What Your Contractor Can’t See Until Work Begins
Even experienced contractors encounter conditions during a striping project that were not visible during the initial walkthrough. These hidden variables can affect timeline, preparation requirements, and final cost:
- Surface condition under existing paint — Old paint may be peeling or poorly bonded, requiring removal before new paint will adhere properly
- Oil saturation areas — Chronic oil drips from parked vehicles can saturate asphalt to the point where paint will not bond, requiring degreasing or primer treatment
- Pavement cracks that affect paint adhesion — Hairline cracks visible during a walkthrough may become larger fractures once old paint is removed or surfaces are cleaned
- Drainage patterns that wash away paint — Low spots where water pools can cause premature paint failure, sometimes requiring minor grading or drainage correction before striping
- Previous sealcoat condition — Old or failing sealcoat can flake off and take fresh striping with it, requiring spot removal or re-sealing before painting
- Subsurface deterioration requiring repair before striping — Soft spots, base failure, or subgrade issues may not be apparent until heavy equipment drives over the surface
- Unexpected ADA compliance issues — Existing ADA spaces may not meet current standards for slope, dimensions, or signage placement, requiring redesign rather than simple restriping
These are reasons why a site visit and detailed quote — not a phone estimate — produces the most accurate pricing for your project.
How Bend Compares to Nearby Oregon Cities
Pricing in nearby Redmond, Prineville, and La Pine varies based on contractor availability, lot complexity, and local demand. Central Oregon's growing population has attracted more striping contractors to the region, gradually bringing pricing closer to western Oregon averages.
For property managers who also need driveway maintenance, see our driveway sealcoating cost in Bend guide for local pricing. If you are restriping after a fresh sealcoat, our guide on parking lot striping after sealcoat covers timing and best practices.
When to Restripe Your Bend Parking Lot
Signs your lot needs restriping:
- Lines are faded to 50 percent visibility or less
- ADA markings are no longer clearly defined
- Drivers consistently park outside the lines
- You have received a code enforcement or ADA compliance notice
- Your lot was recently sealcoated and needs fresh lines
For a deeper understanding of striping fundamentals, read our line striping basics guide. Property managers planning a complete lot refresh should review our parking lot striping complete guide for the full process.
Frequently Asked Questions
How much does parking lot striping cost in Bend, Oregon?
Industry sources have historically reported baseline costs of $3.50–$7 per space for standard restriping. A 100-space lot has been reported in the range of $650 to $1,100 for restriping, or $1,000 to $1,700 for a completely new layout. ADA-compliant spaces have been reported at $225 to $400 each including the access aisle and stencil. However, actual project costs frequently exceed these baselines — sometimes by 2 to 3 times — depending on surface condition, paint type, lot complexity, and current market conditions. A site-specific quote is the only way to get an accurate number.
How often should a parking lot be restriped in Bend?
Most Bend lots need restriping every 18 to 24 months with standard water-based paint. High-traffic retail lots may need annual touch-ups. Lots using thermoplastic markings can go 3 to 5 years between applications. Lots restriped after a fresh sealcoat tend to last longer because the smooth, dark surface provides better paint adhesion and contrast.
Is it cheaper to restripe or do a full new layout?
Restriping an existing layout costs 40 to 60 percent less than a new layout because the contractor follows existing lines without measurement and planning. However, if your lot has never been professionally laid out, a new layout often maximizes your space count and ensures ADA compliance — paying for itself through better space utilization.
What is the best time of year to stripe a parking lot in Bend?
Late spring through early fall provides the best conditions — dry weather, temperatures above 50°F, and enough daylight for quality work. Booking in spring for early summer application often secures better pricing and scheduling flexibility before the peak season rush.
Does parking lot striping include ADA compliance?
Standard restriping refreshes existing ADA markings but does not evaluate whether your lot meets current ADA requirements. A full ADA compliance review — including space count, dimensions, signage, and access aisle placement — is a separate service that should be part of any new layout project. Bend properties must comply with both federal ADA standards and Oregon's parking lot striping regulations.
Get Your Bend Parking Lot Striping Quote
Stop estimating — get an accurate quote based on your actual lot size, condition, and requirements. Cojo Excavation & Asphalt provides free, no-obligation striping estimates for Bend property managers, business owners, and HOAs. We measure your lot, assess the surface condition, and deliver a transparent quote with no hidden fees.
Request a free striping estimate — we respond within 24 hours.
View our completed striping projects to see the quality of work Bend property managers expect. Learn more about our full range of professional striping services and how we help Deschutes County businesses maintain safe, compliant, and professional-looking parking facilities.