Speed Bumps
Rubber Speed Bump Cost in 2026: Per-Unit & Installed Pricing
Cojo
May 7, 2026
6 min read
A rubber speed bump in Oregon runs $80 to $400 per unit for the section itself, plus $200 to $600 in install labor and hardware. Complete installed cost on a typical heavy-duty 6-foot section lands between $200 and $700 — the spread depends on commercial vs residential grade, site complexity, and signage. Multi-bump installs usually shave 10 to 25 percent off because mobilization gets spread across the job.
Below: rubber speed bump pricing broken out by section type, by install component, by per-foot equivalent, and the 2026 market reality that's pushed real-world quotes 10 to 25 percent above 2024 baselines.
Industry Baseline Range
| Component | Range |
|---|---|
| Residential 4 ft section (material only) | $80 to $200 |
| Heavy-duty commercial 4 ft section (material only) | $150 to $260 |
| Heavy-duty commercial 6 ft section (material only) | $200 to $400 |
| Industrial-grade 6 ft section (material only) | $300 to $500 |
| Anchor hardware (lag bolts plus epoxy per bump) | $30 to $80 |
| Install labor per bump | $150 to $400 |
| Yellow chevron paint per bump | $40 to $120 |
| W17-1 advance warning sign installed | $200 to $500 |
| Pavement-embedded reflectors (per pair) | $30 to $60 |
| Mobilization fee per project | $250 to $800+ flat |
In 2026, rubber speed bump costs in Oregon have run 10 to 25 percent above 2024 baselines, driven by:
For a fuller cost discussion across all materials, see our speed bump cost guide. For ranked rubber product picks, see our best rubber speed bumps 2026 guide.
For property managers comparing rubber bumps with asphalt or concrete on a per-foot basis:
| Section Type | Per-Foot Material | Per-Foot Installed |
|---|---|---|
| Residential rubber 4 ft | $20 to $50 | $40 to $110 |
| HD commercial rubber 4 ft | $40 to $65 | $50 to $130 |
| HD commercial rubber 6 ft | $35 to $65 | $40 to $115 |
| Industrial rubber 6 ft | $50 to $85 | $55 to $150 |
A typical install on existing pavement runs through these line items:
The bump itself is the largest single line item. Heavy-duty commercial rubber averages $250 to $350 per 6-foot section. End caps add $80 to $200 per location.
Per-bump hardware: 6 lag bolts (3/8 by 4 inch) plus structural epoxy plus stainless washers. Bulk-rate cost is $20 to $50 per bump for hardware. Field-rate (small jobs) runs $30 to $80.
A 6-foot rubber section installs in 60 to 120 minutes by a 2-person crew on sound asphalt or concrete. Labor cost depends on crew size and rate; Oregon Willamette Valley labor in 2026 runs $80 to $150 per crew-hour. Per-bump labor at $150 to $400 reflects 1 to 4 crew-hours.
Yellow-and-black chevron paint per ITE specification runs $40 to $120 per bump for water-based traffic paint. Thermoplastic chevrons run $80 to $250 per bump and last 3 to 5 years versus 12 to 18 months for paint. See our Institute of Transportation Engineers reference for the chevron pattern spec.
Pole-mounted reflectors at $40 to $80 each are standard on commercial installs. A Manual on Uniform Traffic Control Devices W17-1 advance-warning sign on a 2-inch steel post runs $200 to $500 installed.
Flat fee covering crew travel, equipment, and project setup. Oregon range: $250 to $800+ per project. Larger projects amortize this across more bumps.
| Project | Bumps | Section Type | Estimated Total Range |
|---|---|---|---|
| Single-family driveway, 1 bump | 1 | Residential 4 ft | $200 to $450 |
| Apartment complex drive aisle | 5 | HD commercial 6 ft | $1,400 to $2,500 |
| Retail-center pickup lane | 3 | HD commercial 6 ft | $850 to $1,800 |
| Distribution-center inbound lane | 6 | Industrial 6 ft | $2,500 to $4,500 |
| HOA private road | 4 | HD commercial 6 ft | $1,100 to $2,000 |
| 24-hour QSR drive-thru | 2 | Reflective polymer 6 ft | $700 to $1,400 |
A residential 4-foot rubber section sourced directly from a manufacturer or supplier typically runs $80 to $200. Hardware (lag bolts, epoxy, paint) runs $30 to $80. Total DIY material cost lands at $110 to $280 per bump, with the property owner contributing labor.
DIY breakeven shifts when:
For step-by-step DIY guidance, see how to install speed bumps.
For a single heavy-duty 6-foot rubber section on a moderate-traffic commercial lot:
| Year | Cost |
|---|---|
| Year 1 install | $200 to $700 |
| Years 2 to 4 (no maintenance) | $0 |
| Year 5 replacement | $200 to $700 |
| 5-year total | $400 to $1,400 |
For a longer-horizon comparison against asphalt and concrete, see our rubber speed bump vs asphalt and concrete speed bump vs asphalt guides.
On a Salem retail center install in March 2026, we placed four heavy-duty 6-foot rubber sections plus two 3-foot end caps along a 14,000 sq ft parking lot. The project specifications:
Total project cost: $2,150 ($358 per bump average including signage and mobilization). The property had been logging 3 cart-corral near-miss incidents per quarter; six months in, the property manager has reported zero. For broader local context, see our speed bump installation in Salem page.
For full-scope rubber bump installs across Oregon, paired with asphalt maintenance services when bumps coincide with paving or sealcoat work, Cojo handles the full project including ADA review, signage, and reflectors.
A practical guide to sealcoating apartment and condo parking lots. Covers phased scheduling, tenant communication, cost allocation, liability, and ROI for property value.
Get accurate 2026 asphalt paving costs for Oregon driveways, parking lots, and roads. Per-square-foot pricing, cost factors, and money-saving tips.
Compare asphalt and concrete driveways side by side: cost, durability, maintenance, appearance, and climate performance for Oregon homes.
Have a question about this topic? We'll respond within 24 hours.