Striping a Sisters Lot to Code
Repainting a Sisters parking lot and striping it to ADA code are different jobs. A downtown lot on Cascade Avenue or a restaurant lot might get fresh lines every few years that simply trace the old layout — old mistakes included. If the previous accessible stall had a too-narrow aisle or a faded symbol, repainting the same lines just renews the violation in brighter paint, which is hard to miss on a tourist-town lot full of visitors.
This guide is about the right version: laying out accessible stalls, aisles, and markings that meet the 2010 ADA Standards and Oregon's overlay. Keep our ADA parking compliance guide for Oregon handy for the legal framework.
Get the Dimensions Right First
Dimensions get chalked out before any paint goes down.
- Standard accessible stall: minimum 8 feet wide
- Van-accessible stall: minimum 8 feet wide with an 8-foot access aisle, or 11 feet wide with a 5-foot aisle
- Standard access aisle: 5 feet wide
- Van clearance: 98 inches of vertical clearance along route, stall, and aisle
On a small Sisters lot, the single accessible space typically has to be van-accessible, because the one-in-six van ratio rounds up to one as soon as you have any accessible stall. That detail is the most common striping miss on small downtown lots. Our 2026 ADA striping requirements page has the full dimension table.
The Access Aisle Carries the Markings
The access aisle beside each accessible stall does more striping work than the stall:
- Diagonal hatching across the full aisle in a high-contrast color
- "NO PARKING" lettering inside the aisle
- A border tying the aisle to the stall at the same surface level
- A connection to the accessible route to the entrance
Adjacent accessible stalls can share one aisle, the space-efficient layout for a compact Sisters lot. On a busy tourist day the hatching is what keeps visitors from grabbing the aisle as a parking spot when the lot fills — it has to read clearly. See our ADA access aisle striping spec for hatch spacing and lettering.
Symbols, Paint, and Mountain-Edge Visibility
The International Symbol of Accessibility goes in each accessible stall, white on a blue field, big enough to read from a moving vehicle. Many Sisters owners also paint the stall border blue, common Oregon practice. Legibility is the priority: intense high-desert UV bleaches paint and hard winters with snow load and plowing wear it down, so markings fade faster than owners expect out here. A faded symbol can be treated as a compliance gap, so reflective beads and an annual repaint schedule are cheap protection.
The Sign — Including Oregon's Fine Plate
Striping is half the job. Each accessible stall needs a vertical sign with the accessibility symbol, mounted with the bottom at least 60 inches above the pavement so it stays visible past a parked vehicle. Van stalls add a "Van Accessible" plate. And in Oregon, the sign must also show the fine amount under ORS 447.233. A crew that lays a perfect stripe job but leaves an old sign without the Oregon fine plate has left the Sisters lot non-compliant.
Refresh or Re-Lay?
If your Sisters lot was laid out correctly, ADA restriping is mostly refreshing the symbol, hatching, borders, and sign. If the original layout was wrong — narrow aisles, no van dimensions, stalls far from the door — then "restriping" really means re-laying that section: measuring, chalking new lines, and painting fresh. Re-laying costs more but is the only real fix for a bad layout. A fresh sealcoat is the ideal moment, since you are painting onto a clean, dark surface with no old lines fighting the new.
A Clean Sisters Striping Sequence
- Confirm required accessible and van counts for your total spaces
- Locate accessible stalls on the shortest accessible route to the door
- Chalk stall and aisle dimensions and verify slope stays under 2 percent
- Paint stall borders, aisle hatching, and "NO PARKING" lettering
- Stencil the accessibility symbol in each stall
- Mount or update signs at 60 inches with the Oregon fine plate
Run in that order, a Sisters restripe produces a layout that survives inspection. Cojo Excavation & Asphalt stripes accessible parking to current code across Sisters and Deschutes County. For standard restripe pricing and scheduling, see our parking lot striping in Sisters guide, or explore our professional striping services.