ADA Parking Striping in Coos Bay, Oregon: Bringing Your Lot Up to Code

Restriping a Coos Bay Lot to ADA Standards

A restripe is the cleanest opportunity a property owner gets to bring a parking lot into ADA compliance. When the old lines are gone or fading, the lot is effectively a blank canvas — and that is the moment to confirm your accessible spaces meet the 2010 ADA Standards for Accessible Design and Oregon's ORS 447.233, rather than simply repainting an old, possibly non-compliant layout.

Coos Bay property owners restripe more often than most of Oregon for one reason: the coast eats paint. Salt-laden air off the Pacific and Coos Bay itself fades traffic paint and interferes with adhesion, and the South Coast's heavy rainfall keeps surfaces damp well into the striping season. Lots along Newmark Avenue, the downtown core, and the bayfront see markings wear noticeably faster than comparable inland lots. Each restripe is therefore a recurring chance to get the accessible layout right.

This guide walks through what a compliant restripe involves. For the statewide framework, start with our ADA parking compliance guide for Oregon.

What a Compliant Restripe Includes

Bringing a lot up to code through striping comes down to four things: count, dimensions, aisle marking, and signage.

Accessible Count

The 2010 Standards require a minimum number of accessible spaces based on total capacity — about one per 25 at smaller sizes (1 for 1 to 25 total, 2 for 26 to 50, 3 for 51 to 75, 4 for 76 to 100), increasing from there. A restripe is the right time to recount, because older Coos Bay lots were frequently striped before current ratios applied and often come up short.

Van-Accessible Spaces

At least one in every six accessible spaces, rounded up, must be van-accessible. Even a small lot with one accessible space needs that space to be van-accessible. Van spaces need an 8-foot space with an 8-foot access aisle, or an 11-foot space with a 5-foot aisle.

Stall and Aisle Dimensions

Standard accessible spaces are at least 8 feet wide with an adjacent 5-foot access aisle. The full layout has to be measured and chalked before paint. Our 2026 ADA striping requirements guide details each dimension.

Access Aisle Marking

Each access aisle must be striped, generally with diagonal hatching and "NO PARKING" lettering, and may be shared between two adjacent accessible spaces. The full specification is in our ADA access aisle striping spec.

Paint Choice Is Critical on the South Coast

In Coos Bay, the paint decision is not an afterthought — it drives how long your compliant layout stays compliant. Standard water-based latex traffic paint that lasts 18 to 24 months inland often fades to a citable level in 12 to 18 months in salt-air conditions. Because faded accessible symbols and aisle markings can themselves be treated as a violation, durability directly protects compliance.

For the accessible portions of the lot specifically — the blue space borders, the International Symbol of Accessibility, and the access-aisle hatching — more durable oil-based traffic paint or thermoplastic is worth the higher cost. These hold color and contrast far longer in coastal conditions. Reflective glass beads improve visibility during Coos Bay's long, wet, dark winters and add a measure of safety for everyone using accessible spaces at night.

Timing matters too. Striping needs dry pavement above 50°F, and the reliable dry window on the South Coast is narrow. Booking ahead for mid-summer through early fall is the difference between a clean cure and a weather-delayed job.

The Blank-Slate Advantage

A restripe temporarily clears the layout, which is the right time to fix problems that are expensive to correct on a fully striped lot:

• Add accessible spaces to meet the current ratio for your lot size
• Widen undersized access aisles to the 5-foot or 8-foot minimum
• Relocate accessible spaces onto the shortest accessible route to the entrance
• Re-stencil faded symbols with correctly proportioned accessibility symbols
• Confirm slope stays at or under 2 percent in every direction on spaces and aisles

Slope is the one item paint cannot fix. If an accessible space has settled — a real risk on Coos Bay's low-lying and fill-supported lots — regrading is required. A professional layout flags it before paint goes down.

Signage Completes the Job

Striping and signage go together. Each accessible space needs a sign with the International Symbol of Accessibility mounted at least 60 inches above grade to the bottom of the sign, a "Van Accessible" plate where required, and Oregon's fine-amount plate. A restripe that refreshes the ground markings but leaves signs faded, too low, or missing the Oregon fine plate is only half compliant.

Get Your Coos Bay ADA Restripe Quote

The accessible portion of your lot carries the most liability, so it is the part most worth getting right. Cojo Excavation & Asphalt restripes Coos Bay and Coos County lots to current ADA layout standards — measuring, verifying counts and dimensions, and applying durable paint built for South Coast conditions.

These standards are general guidance; a site-specific review confirms your exact obligations and is something we recommend before any restripe. See our professional striping services, compare local pricing in our parking lot striping in Coos Bay guide, or request a free quote — we respond within 24 hours.